|
|
 |
Auto Labe Label Applicators and Labeling Systems
|
| 
Model 130 Blow-On Automatic Label Applicator | |
AUTO LABE MODEL 130
BLOW-ON AUTOMATIC LABEL APPLICATOR SPECIFICATIONS
Dimensions: 17"/43cm
Weight: 35 lbs/16kg (approx.)
Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
Air: n/a
Labels: Standard 4 1/2" web width 10" O.D. roll with 3" core
Die cut with 1/8" spacing
Labeling Speed: 1250" continous web speed per minute
|
|
Autolabe's Blow-On Applicator is designed for non-contact applications or where container recessed areas require accurate label placement. The Blow-On Applicator works at any angle and special rotational mounts are available. The standard label vacuum grid is 4 1/2" x 4 1/2". Custom vacuum grids can be made to accommodate most label sizes. The Model 130 Blow-On applicator is ideal for custom applications where other labeling methods are inefficient.
BLOW-ON OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or stopped at the point of application. The label is stripped from the web and is held on a blow grid by vacuum. When the sensor or switch detects the product, the label is blown onto the product with a blast of air.
Auto Labe has designed over 1,000 custom pressure sensitive labeling systems for many of the largest packagers around the globe!
We welcome the opportunity to hear about your pressure-sensitive applications and formally quote the most cost-effective solution to your needs. To do this we ask that you forward to us your label and product samples and we will have our professional engineering staff evaluate the best way to approach the project.
|
|
|
|
|
