|
|
 |
|
| 
| |
HEAVY-DUTY "S-100" & "S-200"
LABEL SLITTERS & SLITTING STATIONS
LABELMATE Label Slitters allow you to print small labels several across ("up") and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases the life and efficiency of your print head and ribbons.
The LABELMATE Models S-100 and S-200 are rugged High-Speed, Heavy-Duty Label Slitters that require no power themselves. They are designed to be used with the LABELMATE CAT-2 Label Rewinder and, for the highest efficiency off-line use, with a Label Unwinder. The CAT-2 Label Rewinder does the work as it pulls the label web through the cutting blades.
The Model S-100 Heavy-Duty Label Slitter includes 2-blades. It is shown here with the optional Preset Counter PC-1. Slitters can be used in either "in-line" or in an "off-line" mode. In "in-line" use, the Slitter is positioned between the printer output and a LABELMATE CAT-2 Label Rewinder. The slitting speed is determined by the printer output speed. In "off-line" use, the Slitter is used with a LABELMATE Unwinder and a CAT-2 Rewinder to achieve maximum slitting convenience and throughput. With slitting speeds up to 30-inches per second in "off-line" mode, you’ll make fast work of big slitting jobs. Off-line slitting is recommended for production operations or for three or more blades because of easier set-up than in-line slitting.
|
|
An optional 6-digit Pre-set Label Counter (PC-1) allows you to set the number of labels to be slit. When the counter reaches your preset number, it sends a "HALT" signal to the LABELMATE CAT-2 Label Rewinder. Power to the CAT-2 rewind motor is then disconnected and braking is applied. You’ll have no more annoying label spills to contend with.
|
For wider labels choose the S-200 Slitter that handles label webs up to 9.5-inches wide. The optional PC-1 Counter is also available on the S-200. Both Slitters use easily-replaced snap-off slitting blades that are click-adjustable so they can be used over most of their length, extending their useful life. No tools are required for blade adjustment or replacement. During the slitting operation, the blades are stabilized with LABELMATE's proprietary system, giving a precise cut at all speeds. Rugged, welded, heavy-gauge steel construction and precision parts yield a product of the highest quality. Put a LABELMATE Heavy-Duty Label Slitter to work for you, today! | |  |
New! COMPLETE "OFF-LINE" LABEL SLITTING STATIONS
 | |
LABELMATE's new "Off-Line" Slitting Stations provide the most convenient and cost-effective slitting solution. You get all the items you need to slit label rolls with labels printed several across or "up." Available in standard and "DELUXE" configurations, the Slitting Station Packages offer you an affordable and easy-to-use system with solid, durable construction. As with all LABELMATE Slitters, cutting blade position is infinitely adjustable and, once locked in, stable, thanks to LABELMATE's proprietary Blade Stabilization System.
(At left) The SLIT-100 Off-Line Slitting Station.
• Money-saving production solutions! |
INDIVIDUAL SLITTERS & ACCESSORIES
LABEL SEPARATOR PLATES - These Plates keep slit label rolls from interleaving or telescoping. Aluminum Separator Plates are recommended for the inner and outer Plates, Thin Plastic for the Plates in-between slit rolls. Typical order: 2 SP Aluminum Separator Plates + Plastic Plates equal to the number of cutting Blades being used.
SOME SLITTER DETAILS: *S-100 **S-200
• Size: HxWxD *12x12x12-inches (305x305x305mm). **15x15x15-inches (381x381x381mm).
• Web Width: *Up to 6-inches (165mm). **Up to 10-inches (254 mm).
• Number of blades: *2 included. **3 included. Recommended maximum number of blades is 5.
• Speed: Same as the printer speed for in-line use. Up to 30-ips (80cm/sec) in off-line use.
• Power: No power is required for the S-100 or S-200 itself.
• Blade Holders: Extra Blade Holders (Model BH-1) are field installable. Blade included. Replacement blades are available at any hardware store, or for best results, order LABELMATE HSB-10 Precision Ground High Speed Replacement Blades for the longest life and sharpest cut.
• Optional: PC-1 Six- (6) digit Pre-set Counter to set batch size. Specify 120vac 60 Hz or 230vac 50Hz power.
• Optional: 5.5" Wide Vanes to support multiple narrow cores on your CAT-2 Rewinder. Order VANE5.5.
• Optional: Separator Plates for your Rewinder. Keeps slit labels from interleaving or sticking together. You need one Separator Plate for each Blade on your Slitter. Order SP-3-INCH for 3" cores, Order SP-ACH for use with the Adjustable Core Holder ACH-1. Also available in thin plastic to minimize width build-up between rewind cores. Order SPP-3-INCH & SPP-ACH.
• Optional: High-Speed Replacement Cutting Blades. 10 very sharp blades in a convenient dispenser. Order HSB-10.
• Warranty: 3-year Parts and Labor Limited Warranty, the longest in the industry. One-year Warranty on PC-1 Pre-Set Counter and its included Power Supply Module.
|
|
|
|
|
