|
|
 | 
| |
"MINI-CAT-10A" & " MC-11"
LOW-COST LABEL REWINDERS
Wind-in or wind-out. Fully bi-directional.
Allow back-feed too!
The popular MINI-CAT Label Rewinders are the world’s lowest-price Label Rewinders. They can rewind label rolls up to 4-1/2-inches wide (5" width for MC-11), up to 8.6-inches (220mm) in diameter at speeds up to 10-ips (inches per second). They can also be used as Label Unwinders for rolls up to 8.6-inches in diameter. There are thousands of MINI-CATs working perfectly around the world.
|
(*) LabelMate products will normally ship the same day or next day
from time of receipt of confirmation of processing of charge to a verified PayPal member.
Subject to change depending on back-orders at time of ordering.
| |
The MINI-CAT-10A and MC-11 Models are identical to each other except for the Core Holder.
|
The MINI-CAT-10A (MC-10A) includes both a 3-inch diameter core holder (left) and a "Coreless Rewind" feature (below) to rewind directly on-shaft. (NOTE: LABELMATE Europe sells the MC-10A as Model MC-10.) | |  |
 | |
Optional Outer Flange for the MINI-CAT-10
Available for the MC-10A is an optional outer flange (MC-10FLANGE) to guide the outside edge of your label roll. Order one with your MINI-CAT-10A / MC-10. Alternatively, you can use the optional Adjustable Paper Guide APG-MC (described below) for the same purpose. |
|
The MC-11 includes a precision engineered Adjustable Core Holder that adjusts instantly to accept any size core from 1-inch to 4-inches (25 to102mm) in diameter. You can also do Coreless Rewinding on the MC-11. | |  |
 | |
Optional Adjustable Paper Guide - For both the MC-10A and MC-11, an optional Adjustable Paper Guide (APG-MC) is available to positively guide the outer edge of the label web as it's being rewound. You can install this inexpensive accessory on your MINI-CAT Rewinder in just minutes. It adjusts for any label width or roll diameter. The photo at left shows the APG-MC installed on an MC-11 Rewinder. |
The MINI-CATs use LABELMATE’s proprietary Constant Adjustable Torque™ ("CAT") technology to achieve impressive, reliable performance at an unprecedented low price. LABELMATE's special MINI-CAT motor, offers trouble-free, bi-directional operation. A multi-position switch allows you to set the amount of rewind force. No mechanical or speed adjustments are required. Your MINI-CAT automatically adjusts to any printer speed up to 10-ips and even automatically allows label back-feeding if your printer requires it.
Rugged steel construction allows your MINI-CAT to be simply set in place near your label printer. Special anti-slip feet prevent the unit from moving. Put a LABELMATE MINI-CAT to work for you today and enjoy a new dimension in label rewinding & unwinding convenience and reliability.
MC-10A & MC-11 SPECIFICATIONS:
• Label Width: Up to 4.5-inches (114+ mm) (5" 127+ mm width on the MC-11).
• Maximum Label Roll Weight: 8.5 lbs. (3.9 kg).
• Label Roll Diameter: Now! Larger roll capacity! Up to 8.6-inches (220 mm).
• Core Diameter: MINI-CAT-10A / MC-10: 3" or coreless. MC-11: Use any diameter core from 1" to 4" (25 to101mm) or rewind coreless.
• Speed: Up to 10-ips (25+ cm/sec). Switch adjustable rewind force. No speed adjustments are required.
• Start/Stop: Convenient ON-OFF switch. Direction: Bi-directional.
• Power Requirements: 120vac 60Hz. 20 va. UL / CSA Listed Power Supply. 220-240vac 50Hz also available at no extra cost.
• Size: HWD 9 x 6 x 11 in. (229 x 152 x 279 mm). Weight: 13 lbs. (5.9 kg).
• Optional: APG-MC Adjustable Paper Guide to guide the outer edge of the labels as they are being rewound.
• Optional: MC-10FLANGE for MINI-CAT-10A / MC-10 to guide the outer edge of the labels as they are being rewound. Not for MC-11.
• Warranty: 3-Year Parts and Labor Limited Warranty, the longest in the industry. (One [1] year Limited Warranty on the included Power Supply Module.)
|
|
|
|
|
