RENA ENVELOPE IMAGER XT 3.0 Key Features
AccuTrak Vacuum Transport
3" of Print From Three Print Modules
34,000 Postcards/hr
Cartridge Capping Station
Tab 'N Print Inline With The T-950 or T-750
The power house Envelope Imager XT series starts with the 3.0 and offers an industry leading combination capabilities. The feature-laden Envelope Imager XT 3.0 offers tremendous advantages over the competition with its exceptional price, high operating speeds, innovative design, and bullet-proof construction. The power of 34,000 postcards/hr and 26,000 #10s/hr gets the job done fast. The Envelope Imager XT 3.0s USB 2.0 port works seamlessly while the advanced microprocessor and 64 MB of RAM crunch data like no other printer. The 3 print area from three independent printheads gives you total freedom in envelope imaging. With unparalleled material handling - its power you can actually use.
Print Technology
Thermal Inkjet, Six HP 45A-Style High Capacity Cartridges
Address Speed
34,000 /hour at 150 dpi
25,000 /hour at 200 dpi
20,000 /hour at 300 dpi
11,500 /hour at 600 dpi
(9 Lines on
4x6 Postcard)
26,000 /hour at 150 dpi
19,000 /hour at 200 dpi
15,000 /hour at 300 dpi
7,200 /hour at 600 dpi
(9 Lines on #10 Envelopes)
Print Quality (Dots Per Inch)
Description
Dots Per Inch
Resolution
High Quality
600 d.p.i.
600 x 600 dpi
Letter Quality
300 d.p.i.
600 x 300 dpi
Standard Quality
200 d.p.i.
600 x 200 dpi
Hi-Speed Quality
150 d.p.i.
600 x 150 dpi
Image Area
3
X 17 w/ 12 Vertical Range
Print Head Split
3 Pen Stitched + 2 Pen Stitched + 1 Pen Design
Processor
AMD TigerSharc 100 MHz DSP with Dual Calculation Technology
Memory
64 MB
RAM
Fonts
All TrueType
fonts available on PC
Print Orientation
Normal and Reverse
Counters
One
operator resettable job counter, one permanent lifetime counter
Ink Monitor
Visible
on Display
Prints
Allows
printing of graphics, logos, and barcodes
Material Size
Minimum (W x L): 3" x 5"
Maximum (W x L): 13.5 x 17
Material Thickness
Up to 3/8
Feeder-Capacity
Feeder Dependent
Software
WindowsTM
Printer Drivers for WindowsTM 98,
2000, NT, ME, and XP
PC Interface
Parallel and USB 2.0
Diagnostics
Resident
in firmware
Firmware Update
Flash PROM update.
Duty Cycle
120
million addresses total or 2,000,000 per month over a 5-year
life cycle
The power house Envelope Imager XT series starts with the 3.0 and offers an industry leading combination capabilities. The feature-laden Envelope Imager XT 3.0 offers tremendous advantages over the competition with its exceptional price, high operating speeds, innovative design, and bullet-proof construction. The power of 34,000 postcards/hr and 26,000 #10s/hr gets the job done fast. The Envelope Imager XT 3.0s USB 2.0 port works seamlessly while the advanced microprocessor and 64 MB of RAM crunch data like no other printer. The 3 print area from three independent printheads gives you total freedom in envelope imaging. With unparalleled material handling - its power you can actually use.
